The SmallRig Field Monitor Mount Holder review centers on a compact camera-rig mount for positioning a 5- or 7-inch monitor above a cage or handle.
Its tilt, swivel and connection options suit creators who want to adjust screen placement without adding a long articulating arm.
SmallRig Monitor Mount Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSmallRig 2905B Field Monitor Mount Holder
A compact, adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.
- Designed for 5- and 7-inch camera monitors, with a cold shoe base for mounting on a compatible camera cage or handle.
- Tilts up to 180 degrees and swivels up to 360 degrees for positioning the screen.
- Tilt tension adjusts by thumbscrew; swivel tension is adjusted with the included Allen wrench.
- Locating pins and a silicone pad help secure a compatible monitor and reduce surface scratching or twisting.
Pros
- Offers wide tilt and swivel adjustment in a small form factor.
- Combines a cold shoe base with a 1/4-inch threaded connection for different rig setups.
Consider before buying
- Swivel tension adjustment requires carrying and using the included Allen wrench.
- The stated load limit changes with tilt angle, so buyers need to check the relevant maximum for their setup.
Read the full review summary
The 2905B combines a cold shoe base with a top 1/4-inch screw, so it can mount to a compatible cage or handle and support a monitor or another small accessory.
It tilts through 180 degrees and swivels through 360 degrees, offering flexibility to position the screen for different shooting angles. The tilt tension adjusts by hand with a thumbscrew; the swivel tension uses the included Allen wrench.
Its locating pins and silicone pad are designed to help secure a compatible monitor and limit scratching or twisting at the contact point.
This is a focused choice for a compact rig where the monitor should sit close to its mounting point.
Before buying, match the mount to your support’s connection and check the load guidance for the angle you plan to use.
The buying factors
SmallRig Monitor Mount Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Angle adjustment
A 180-degree tilt range and 360-degree swivel offer broad positioning options for a compact mount.
Mounting flexibility
The cold shoe base, bottom 1/4-inch threaded hole and top 1/4-inch screw support several common rig connections and accessories.
Monitor retention
Locating pins and a silicone pad are useful design features for holding a compatible monitor in place and protecting its surface.
Adjustment convenience
The tilt can be adjusted with a thumbscrew, while changing swivel tension requires the included Allen wrench.
Load guidance
Angle-specific maximums give buyers practical limits to consider, though they require attention when positioning heavier gear.
Compact carry
At 76 grams with a listed folded size of 78 by 67 by 42 millimeters, it adds little bulk to a camera setup.
Key Features and Specifications of SmallRig Monitor Mount
- Designed for 5- and 7-inch camera monitors, with a cold shoe base for mounting on a compatible camera cage or handle.
- Tilts up to 180 degrees and swivels up to 360 degrees for positioning the screen.
- Tilt tension adjusts by thumbscrew; swivel tension is adjusted with the included Allen wrench.
- Locating pins and a silicone pad help secure a compatible monitor and reduce surface scratching or twisting.
- A bottom 1/4-inch threaded hole supports connection to a magic arm or stabilizer; the top 1/4-inch screw can hold a monitor, microphone or light.
- Angle-specific load limits: under 9.3 pounds at 90 degrees, under 5.5 pounds at 45 degrees and under 5 pounds at 30 degrees. The knurled 1/4-inch screw should be retightened with the Allen wrench for added security.
- Compact dimensions are 1.18 by 2.07 by 1.18 inches; listed weight is 76 grams.
Pros and Cons of SmallRig Monitor Mount
Pros
- Offers wide tilt and swivel adjustment in a small form factor.
- Combines a cold shoe base with a 1/4-inch threaded connection for different rig setups.
- Locating pins and a silicone contact pad are designed to improve monitor seating and protect its surface.
- Hand-adjustable tilt tension makes quick angle changes straightforward.
Consider before buying
- Swivel tension adjustment requires carrying and using the included Allen wrench.
- The stated load limit changes with tilt angle, so buyers need to check the relevant maximum for their setup.
- Its cold shoe base is intended for compatible cage or handle mounts; check that your rig provides a suitable connection.
Who Should Buy SmallRig Monitor Mount?
Good fit
Consider the SmallRig 2905B if your camera setup has a compatible cold shoe and you want to position a 5- or 7-inch monitor close to the cage or handle.
The 180-degree tilt and full swivel give room to orient the screen, while the pins and silicone pad provide useful contact features for a monitor mount.
It may also suit a compact accessory setup: the top screw can accept a microphone or light, and the bottom threaded hole can connect to a magic arm or stabilizer.
Review the angle-specific load limits before mounting your equipment, and use the wrench to retighten the knurled screw as directed.
Who should skip it
Skip this design if your support does not offer a compatible cold shoe and you do not plan to use its bottom threaded connection with another support.
Also consider another mounting approach if you need to change swivel tension frequently without an Allen wrench or want to position a monitor far from the mounting point.
How the SmallRig Monitor Mount fits a camera rig
Angle range and adjustment
The broad tilt and swivel ranges let an operator orient a screen for framing from different positions.
Tilt tension is controlled with a thumbscrew, which is convenient for hand adjustments; swivel tension uses the included Allen wrench, making that adjustment less immediate.
Think about which axis you will change most often when deciding whether the controls suit your workflow.
Connection choices
The cold shoe at the bottom is suited to a cage or handle with a matching shoe mount.
A 1/4-inch threaded hole below offers another connection path through a magic arm or stabilizer, while the top 1/4-inch screw supports the monitor or another listed accessory.
Confirm your rig’s connection points and the accessory’s thread before assembling the setup.
Load limits at different angles
The listed maximum changes with tilt: under 9.3 pounds at 90 degrees, under 5.5 pounds at 45 degrees and under 5 pounds at 30 degrees.
These are upper limits rather than a reason to assume every angle supports the same load. Check the number that matches your intended position, and retighten the knurled screw with the Allen wrench as directed.
Monitor contact and portability
Locating pins and a silicone pad address two practical concerns at the mounting point: keeping a compatible screen seated and reducing the chance of surface scratches or twisting.
The mount’s 76-gram weight and compact listed dimensions should make it easy to carry as part of a small rig, particularly when a dedicated short mount fits the desired screen position.
Alternatives to SmallRig Monitor Mount
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig 6313 Camera Monitor Mount
Choose the 2905B if its 5- or 7-inch monitor focus and angle-specific load guidance fit your setup.
Consider the 6313 if you want portrait or landscape mounting options and a retractable locating screw; confirm that its listed compatibility suits your monitor.
- The 6313 offers a retractable 1/4-inch locating screw, locating pins, a silicone pad, cold shoe and threaded connections, plus horizontal or vertical monitor installation.
- Its tilt and pan ranges are 180 and 360 degrees, and its tilt damping adjusts by thumb knob.
- The 2905B supports 5- and 7-inch monitors, with locating pins, a silicone pad, a cold shoe base and a bottom 1/4-inch threaded hole.
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 Magic Arm Clamp Kit
Choose the 2905B for a compact monitor mount that attaches directly to a compatible cage or handle.
Consider the 2732 when you need a longer reach and a clamp attachment for rods, shelves or other supports within its jaw range.
- The 2732 includes a 9.8-inch articulating arm and a super clamp with 1/4-inch and 3/8-inch threads.
- Its dual ball heads rotate 360 degrees, and the clamp opens from 15 to 54 millimeters.
- The 2905B attaches through a cold shoe or its bottom 1/4-inch threaded hole and is designed for compact monitor positioning.
Is SmallRig Monitor Mount Worth It?
The SmallRig 2905B Field Monitor Mount Holder is worth considering for a compact camera rig that needs an adjustable 5- or 7-inch monitor position, broad tilt and swivel movement, and a cold shoe or threaded mounting option.
Its locating pins, silicone pad and hand-adjustable tilt tension address useful day-to-day setup needs.
Check the angle-specific load limit and connection fit before choosing it.
The included Allen wrench is needed to adjust swivel tension and retighten the knurled screw, so buyers who prioritize frequent tool-free repositioning may prefer a different mount style.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSmallRig 2905B Field Monitor Mount Holder
A compact, adjustable mount for camera operators who want to position a 5- or 7-inch monitor on a cage or handle.
- Designed for 5- and 7-inch camera monitors, with a cold shoe base for mounting on a compatible camera cage or handle.
- Tilts up to 180 degrees and swivels up to 360 degrees for positioning the screen.
- Tilt tension adjusts by thumbscrew; swivel tension is adjusted with the included Allen wrench.
- Locating pins and a silicone pad help secure a compatible monitor and reduce surface scratching or twisting.